Free tool · China & network

Ping any host from cities worldwide

Ping any host from cities worldwide, measured by independent public probes (Globalping), not our network. See round-trip time and packet loss.

From (choose 1–3 cities) Selected 0/3

Americas

Europe

Middle East

Southeast Asia

Asia-Pacific & Africa

How this works and its limits

Tests run on independent public probes (Globalping) in cities worldwide and return round-trip time and packet loss only. Private and internal addresses cannot be tested, and each visitor has a small allowance of tests to keep the service fair.

Results show total timing, never hops, autonomous systems or carriers. Only test hosts you own or have permission to test. Targets and results are public for up to six months; do not test hosts you need to keep private.

Data sources and licences

Operator names, brands and codes shown here are public reference data compiled from national regulators and other public sources. Their appearance does not indicate any partnership, endorsement, agreement or connectivity between unicomam.com and the named operators. All trademarks belong to their owners. Data is provided “as is” with no warranty; verify against the official source before relying on it for routing, billing or compliance decisions.

Regulatory information is for reference only and is not legal advice; check the regulator link and the “last verified” date.

Measurements powered by Globalping (opens in a new tab), a public measurement network; results and targets are public under Globalping’s terms.

What a ping test tells you

A ping sends small packets to a host and measures how long the replies take to come back. The round-trip time shows how far away the host is in network terms, and lost replies point to congestion or filtering along the way.

Testing from several locations helps separate a problem at the destination from a problem on one route. Some hosts do not answer ping at all, so no reply does not always mean the host is down.

Frequently asked questions

Why is there no traceroute?

A hop-by-hop view would show how the traffic is carried, which is outside what this tool measures. Ping and timing are enough to compare locations.

Why did my host not answer?

Many servers and firewalls drop ping packets. Try the host’s domain name instead, or test another host on the same network.

Can I test a private address?

No. Private, internal and reserved addresses are blocked.